Hand Guards

Tusk D-Flex Handguards with MX Shields

$39.99

hand protection and durability. For a more "race" look, this kit includes the MX style plastic shield that mount to the aluminum guard. The tough, tempered aluminum guard is designed with a large bend for lever clearance. The plastic shields are durable and can be easily replaced. The hand guard kit…

Sicass Racing Plastic Hand Shields With Turn Signal

$53.99

*Clean up the look on the front of your bike with these plastic hand shields with integrated LED turn signals. *Easily mounts to any wrap around aluminum hand guards. (May have to pre-drill holes) *Pre-wired with factory KTM connectors. *NOTE: IF INSTALLING LED TURN SIGNALS ON THE FRONT AND REAR OF…

Suzuki Hand Guard Set

$50.99 - $111.99

*Hand Guards fot the V-Strom protect against wind and debris. *Easy to install.

Acerbis Rally Pro X-Strong Handguards

$75.88 - $83.88

…is designed for the more serious rider. *High impact nylon composite injection molded handguard wrapped around a hard anodized aluminum inner guard that privies unequaled strength. *A small integral spoiler is integrated into the design for increased protection. *Comes in standard colors. *Universal…

Tusk D-Flex Handguards

$49.99

…best off-road motorcycle handguards on the market. The tough, tempered aluminum guard is designed with a large bend for lever clearance. The plastic shields are durable and can be easily replaced. The hand guard kit comes with bar mounts for 7/8" handlebars. Larger 1 1/8" clamps are sold separately.…

Ram Mounts Rail Base with Zinc Coated U-Bolt, ATV/UTV Strap & 1" Ball for Rails up to 3.15" in Diameter

$21.99

Whether your UTV or ATV is bone stock or loaded with accessory racks and guards, the new RAM strap base lets you choose the best possible mounting location for almost anything. Designed for a clean installation, this base accommodates most common tubing sizes on UTV’s and ATV's, allowing for the…

Cycra Probend CRM Handguard Racer Pack 7/8" Bars

$119.99

*Pack includes: CRM probend bars, CRM mount clamps, classic natural colored enduro shields, powergrip bar ends, probend abrasion guards. *Center reach clamps provide maximum bite to secure handguards and allows for superior clearance on a wide range of bars. *Powergrip alloy bar ends fit steel or…

Memphis Shades Hand Guards

$79.95

*Stylish wind protection for your hands. *Mounts are E-coated aluminum; guards are rubber isolated. *Made of lucite. *Ghost comes with polished mounting: black opaque comes with black mounting hardware. *Sold in pairs. *Black opaque. *Ghost = almost clear with a very light black tint-85% visible…

BRP Hand Guard Mounts

$75.00

…anodized for a trick look. BRP Hand Guard Mounts have the same contour and shape as BRP & Scotts SUB Mounts. Kit includes all necessary hardware. BRP Hand Guard Mounts work best with: Cycra Pro-Bend, Cycra Composite, Enduro Engineering, Acerbis, Moose & MSR Hand Guards. Will Not Work with Cycra CRM…

Woodcraft Hand Guard Mounting Base

$66.49

Woodcrafts hand guards are designed to prevent a crash due to inadvertant lever contact between two riders and also helps to protect your hands in the event of a crash. *Aluminum Mounting Base. *Mounts to any 7/8" OD bar or clip-on. *Approved by AMA and FIM race associations. *Approved by AMA and…

Woodcraft Hand Guard Assembly (Pair)

$170.99

Woodcrafts hand guards are designed to prevent a crash due to inadvertant lever contact between two riders and also helps to protect your hands in the event of a crash. *Includes BOTH LEFT and RIGHT side mounts and guards. *Mounts to any 7/8" OD bar or clip-on. *Approved by AMA and FIM race…

Related Products Woodcraft

Woodcraft Hand Guard Assembly (Left)

$104.49

Woodcrafts hand guards are designed to prevent a crash due to inadvertant lever contact between two riders and also helps to protect your hands in the event of a crash. *Includes LEFT side mount and guard. *Mounts to any 7/8" OD bar or clip-on. *Approved by AMA and FIM race associations. *Approved…

Woodcraft Hand Guard Assembly (Right)

$104.49

Woodcrafts hand guards are designed to prevent a crash due to inadvertant lever contact between two riders and also helps to protect your hands in the event of a crash. *Includes RIGHT side mount and guard. *Mounts to any 7/8" OD bar or clip-on. *Approved by AMA and FIM race associations. *Approved…

Sicass Racing Hand Guards With Turn Signal

$125.94

…*Fits 1-1/8” (28.6mm) “Fat” bars. *Clean up the look on the front of your bike with these plastic hand shields with integrated LED turn signals. *Easily mounts to any wrap around aluminum hand guards. (May have to pre-drill holes) *Pre-wired with factory KTM connectors. *NOTE: IF INSTALLING LED TURN…

BRP Flexx Handlebar Hand Guard Mounts

$75.00

…the fit of these type of hand guards; such as bar width, height, position etc. When installing new hand guards it's usually best to fit the hand guards up and float them in before you tighten any bolts. In some cases it may be necessary to slightly bend the hand guard to fit correctly especially…

R&G Racing Lever Guard

$50.79 - $56.95

…*Essential for lane splitting or filtering through tight traffic. *Highly recommended for track day riders. *Sturdy DuPont Zytel Nylon construction. *Simple & easy to install without modifications. *Lever guards sold each. *Includes: One R&G lever guard. Mounting hardware. Installation instructions.

Dion Device Clutch Lever Guard

$179.99

…matte clear coat. *Light weight 8.5oz. *Left and right side available. *Designed after the Factory Racer. *Inside out mounting. *Adjustability for different bars, levers and fairings. *Superior master cylinder & handlebar protection. *Helps prevent rider injury. *Official lever guard of the AMA.

AltRider Header Guard

$173.97

…time could become lodged in the engine and cause higher operating temperatures and upset the suspension. Complement your existing skid plate in both design and fit with protection from the AltRider Header Guard. *Anodized aluminum construction *Hand TIG welding *Integrates with the OEM skid plate

R&G Racing Universal Lever Guard

$56.95

…*Essential for lane splitting or filtering through tight traffic. *Highly recommended for track day riders. *Sturdy DuPont Zytel Nylon construction. *Simple & easy to install without modifications. *Lever guards sold each. *Includes: One R&G lever guard. Mounting hardware. Installation instructions.

KTM Lever Guard (Race Style)

$49.99

…*Protects the lever in the event of unintentional ground contact. *No unintentional shifting in the event of contact with another rider vehicle. *Simple exchange of the standard handlebar weight. *Lever guard made from unbreakable plastic. *Handlebar fitting made from high-grade cast aluminum.

Vortex V3 Brake Lever Guard

$116.99

*Trick looking yet functional for any street or race bike. *Billet aluminum, adjustable to 3 positions. *Mounts to end of 7/8" handlebar.

Vortex V3 Clutch Lever Guard

$116.99

*Trick looking yet functional for any street or race bike. *Billet aluminum, adjustable to 3 positions. *Mounts to end of 7/8" handlebar.

Driven Racing D-Axis Clutch Lever Guard

$134.96 - $134.99

*Machined from 6061 billet aluminum. *Curved body for safe dismounting. *45mm of adjustment and up to 171mm in total length. *Feature a break-away tip to help avoid bikes and riders from becoming attached after collision. *Kit designed to properly fit most OEM bars as well as after-market handlebars…

Driven Racing D-Axis Brake Lever Guard

$134.96 - $134.99

*Machined from 6061 billet aluminum. *Curved body for safe dismounting. *45mm of adjustment and up to 171mm in total length. *Feature a break-away tip to help avoid bikes and riders from becoming attached after collision. *Kit designed to properly fit most OEM bars as well as after-market handlebars…

Pro Guard Disposable Powder Free Nitrile Gloves

$13.99

The Pro Guard Disposable Powder Free Nitrile Gloves are made with high quality materials and offer improved dexterity and touch sensitivity over looser fitting LDPE gloves. A disposable glove not only keeps your hands protected, but is ideal when working with fluids and chemicals. *Resistant to…

Tusk D-Flex Bar-End Clamp Handlebar Inserts

$7.99

*Replacement Tusk D-flex hand guard handlebar inserts. *Will fit most brands of hand guards that require handlebar inserts. *For both aluminum and steel bars. *Sold in pairs

Tusk Handguard Adaptor

$9.99

*Replacement mounts for Tusk Aluminum Hand Guards. *Only fits 7/8" bars. *Sold in Pairs.

Spider Grips SLR Dual-Layered Open End Grips

$13.99

Thin and precise, the SLR dual layer grip is perfect for Sport, Road and Motard riders. Gel layers dampen vibration and provide great traction. A narrow flange and open end make the SLR easy to mount even with bar ends or hand guards. *Twist throttle *Slim Line *Open end for bar ends or hand guards

Tusk Clutch Perch

$6.99 - $9.99

*Replacement clutch bracket that accepts OEM or OEM type clutch levers. *Split perch design for easy mounting without having to remove any other bar mounted accessories such as wrap around hand guards or grips. *Includes cable adjuster.

Acerbis X-Ultimate Handguards

$31.88

*Open hand guard. *Nylon bracelets. *Upper and lower lids removable for maximum ventilation. *Universal mounting behind the pump. *Horizontally adjustable. *Application: handlebars external diameter from 2mm, to 28mm, and twinwall. *Mounting kit included.

Woodcraft Bar End Sliders

$37.98 - $47.48

…relief from hand numbness associated with excessive vibration. Weight - 4.5 ounces each * With Hand Guard Mount - provides the surface area needed to mount the Woodcraft Hand Guard (sold separately) without moving your controls and provides considerable extra protection for the lever guards. Weight…

Fastway F.I.T. Version 3 Handguards 7/8" Bars

$104.41

…system still uses an integrated hand guard mount tabs for a more rigid and cleaner mounting setup than normal hand guard systems and keeps cables and brake lines from interfering with guards. *Shields sold separately. *6061 billet aluminum impact deflector hand guards. *6061 billet aluminum solid…

Fastway F.I.T. Version 3 Handguards 1 1/8" Bars

$104.41

…system still uses an integrated hand guard mount tabs for a more rigid and cleaner mounting setup than normal hand guard systems and keeps cables and brake lines from interfering with guards. *Shields sold separately. *6061 billet aluminum impact deflector hand guards. *6061 billet aluminum solid…

Fastway F.I.T. Version 3 Handguards with Shields 1 1/8" Bars

$125.26

…system still uses an integrated hand guard mount tabs for a more rigid and cleaner mounting setup than normal hand guard systems and keeps cables and brake lines from interfering with guards. *Shields included. *6061 billet aluminum impact deflector hand guards. *6061 billet aluminum solid top…

Fastway F.I.T. Version 3 Handguards with Shields 7/8" Bars

$125.26

…system still uses an integrated hand guard mount tabs for a more rigid and cleaner mounting setup than normal hand guard systems and keeps cables and brake lines from interfering with guards. *Shields included. *6061 billet aluminum impact deflector hand guards. *6061 billet aluminum solid top…

Yamaha Factory ProBend CRM Racer Pack by Cycra® 1-1/8" Bars

$156.99

…bar ends, and all necessary hardware. *Revolutionary patented billet construction. *Trademarked probend shape. *Replaceable integrated plastic abrasion guard; center reach clamps provide maximum bite to secure hand guards and allows for superior clearance on a wide range of bars. *Sold in pairs.

Fasst Kudla Connection Handguard Mounting Brackets

$49.99

…Kudla Connection Handguard Mounting Brackets allow riders to mount most hand guards to the Flexx Handlebar at the pivot point, complementing the bar’s articulation. Although the Kudla Connection works with most guards it works best with Enduro Engineering, Moose, Tusk and MSR wrap around aluminum…

Woodcraft Replacement Handguard Ends (left)

$28.49

Now in the unfortunate event of a slide, or to simply change the look of your machine you can change out your hand guard ends! *Includes replacement plastic lever guard and bolts. *Approved by AMA and FIM race associations. *Approved by AMA and FIM race associations. *Approved by AMA and FIM race…

Woodcraft Replacement Handguard Ends (Right)

$28.49

Now in the unfortunate event of a slide, or to simply change the look of your machine you can change out your hand guard ends! *Includes replacement plastic lever guard and bolts. *Approved by AMA and FIM race associations. *Approved by AMA and FIM race associations. *Approved by AMA and FIM race…

Tusk Enduro Handguard

$19.95

…plastic handguard with a universal handlebar mounting system to work on most motorcycles and ATV’s. Made from High-impact resistant plastic, these hand guards protect against roost from other riders. Uniquely shaped mounts are designed to fit on any handlebar without inferring with control cables.…

Cycra Rebound Handguard Racer Pack

$59.99

*Strongest independent mount hand guard system available. *Unrivaled strength against trail debris. *Vigorously tested for durability and quality assurance. *Great alternative to wrap around systems for woods or MX. *Patented folding shield for those unexpected quick departures. *Trick billet…

Motion Pro Titan Throttle Tube

$19.79

…and eliminates galling. *No irritating and uncomfortable vibration like aluminum tubes. *Higher performance than aluminum tubes at a much lower cost. *Cannot be used with bar end mounted hand guards. *5 year crash warranty - If it stops working due to a crash or tip over Motion Pro will replace it!

Tusk D-Flex Pro Handguards

$69.99

…offers. The tough, tempered aluminum guard is designed with a large bend for lever clearance and plenty of room for your hands. The large plastic shields are very durable and can easily be replaced. The hand guard kit comes with aluminum bars, plastic hand shields and bar mounts for 1 1/8" or 7/8"…

KTM Acerbis X-Force Handguards

$39.95

…or below levers. The included spoilers allow the hand-guards to be mounted with or without ventilation. *Motorcycle only. *Made in nylon and polypropylene. *Braces in nylon. *2 vertical mounting points. *Universal mount. *Also includes spoilers to give the vented guards full coverage if desired.

Acerbis X-Force Handguards

$28.88

…or below levers. The included spoilers allow the hand-guards to be mounted with or without ventilation. *Motorcycle only. *Made in nylon and polypropylene. *Braces in nylon. *2 vertical mounting points. *Universal mount. *Also includes spoilers to give the vented guards full coverage if desired.

BRP Threaded Bar End Insert Kit

$29.95

BRP Threaded Bar Inserts ... are a more secure mounting system for aluminum handlebars using wrap-around style enduro hand guards. They are sold as a self install kit that includes two inserts, two flathead bolts to mount your handguards , one 5/8-11 tap to thread your handlebars and an instruction…

Renthal Moto Handguards

$35.99

Renthal’s Moto Handguards are designed to offer your hands protection against roost in a sleek and simple design. Ultra lightweight, these guards are designed to not interfere with your controls and provide excellent protection against rocks and roost in motocross applications. Multiple mounting…

Tusk D-Flex Replacement Plastic Handguard Shields

$29.99

*A replacement shield designed for the alloy guard on the D-Flex handguard. *Sold in a pair.

ProTaper Handguards Shield Extenders

$11.66

*Injection molded, high-impact plastic. *Offers extended protection. *Comes with hardware to mount to the standard Brush Guard kit. *Requires some drilling and a rivet gun for installation.

PowerMadd Sentinel Handguards

$36.00

…to be the most stylish, durable and funtional handguard to date. The Sentinel guard is larger compared to the Star Series which in turn gives you more protection. The mounting brackets are 6061 aluminum, while the guard itself is made of two different types of plastic—a stiff two piece spine for…

PowerMadd Sentinel Handguards with Tri-Mount Kit

$72.00

…to be the most stylish, durable and funtional handguard to date. The Sentinel guard is larger compared to the Star Series which in turn gives you more protection. The mounting brackets are 6061 aluminum, while the guard itself is made of two different types of plastic—a stiff two piece spine for…

PowerMadd Sentinel Handguards with ATV/MX Mount Kit

$72.00

…to be the most stylish, durable and funtional handguard to date. The Sentinel guard is larger compared to the Star Series which in turn gives you more protection. The mounting brackets are 6061 aluminum, while the guard itself is made of two different types of plastic—a stiff two piece spine for…